Emulex 2 Gb/s LP9802DC 2 Port FC HBA PCI-X 133 MHz Card refurbished

Emulex 2 Gb/s LP9802-DC 2 Port  FC HBA PCI-X 133 MHz Card refurbished
Modell: LP9802-DC

STANDARDS:
ANSI Fibre Channel FC-FS, FC-PH, FC-PI, FC-AL, FC-PLDA, FC-MI, FC-FLA, PCI-X 1.0a , PCI local bus revision 2.2 (see power requirements), Fibre Channel Class 2, 3, PHP hot plug - hot swap

ARCHITECTURE:
Emulex Pegasus ASIC technology, up to 133MHz PCI-X DMA, 2Gb/s or 1Gb/s FC Link , 2MB FLASH memory, 2MB QDR SRAMSOFTWARE ENVIRONMENTS:
Windows Server 2003, Windows 2000, Windows NT, HP-UX, Linux, NetWare,SolarisHARDWARE

ENVIRONMENTS:
x86, SPARC and PowerPC PCI hardware platforms, 3.3V signaling, 5V tolerant, 32/64b 33/66MHz PCI, 66/100/133MHz PCI-X PHYSICAL DIMENSIONS:
Short low profile MD2 form factor, Low profile or standard bracket167.64mm x 64.42mm (6.60" x 2.54")

OPTICAL:
Data rates: 1.0625/2.125Gb/s,Optics: short/long wave lasers,Cable: 9/125µm single-mode fiber50/125µm multi-mode fiber62.5/125µm multi-mode fiber,Connector: LC
Distance: (1Gb/s)10K meters (32,800') 9/125 µm fiber500 meters (1,640') 50/125 µm fiber300 meters (984') 62.5/125 µm fiber(2Gb/s) 10K meters (32,800') 9/125 µm fiber300 meters (984') 50/125 µm fiber150 meters (492') 62.5/125 µm fiber

POWER REQUIREMENTS:
Volts: +3.3 VDC (± 5%), Power: 7.7 watts @ 66MHz, 8.5 watts @ 133MHz (typ)ENVIRONMENTAL

CONDITIONS:
Operating temperature: 0° to 45°C (32° to 113°F), Airflow required: 100 lf/m, Storage temperature: -40° to 70°C (-40° to 158°F), Relative humidity: 5% to 95% non-condensing

AGENCY APPROVALS:
Class 1 Laser Product per DHHS 21CFR (J) & EN60825, UL recognized to UL 1950, CUR recognized to CSA22.2, No. 950, TUV certified to EN60950, FCC rules, Part 15, Class A, ICES?003, Class A, EMC Directive 89/336/EEC (CE Mark) - EN55022, Class A - EN55024, Australian EMC Framework (C?Tick Mark) - AS/NZS 3548, Class A, VCCI, Class A

DRIVER SUPPORT:
A rich suite of software complements the LP9802. Some examples of the features included are, LUN Masking, LUN Mapping, Persistent Binding, I/O Coalescing, full fabric boot in both x86 and Sparc environments as well as support for multi or simultaneous protocol (SCSI & IP) operation. In addition, most drivers include a full-featured implementation of the FC-MI HBA Management Interface. These features enable advanced storage area network (SAN) implementations in Windows Server 2003, Windows 2000, Windows NT, Linux, HP-UX, Solaris and NetWare environments. All drivers are also fully compatible with the Emulex LP10000, LP9002L, LP8000, LP7000E, LP9402DC, and LP9002C host bus adapters. Windows, Linux and NetWare drivers are also compatible with the LP1050, LP850, LP952L and LP982.